Meyra 2.432 Specifications download pdf (Page 3)

3

GB

ASSEMBLY

Our specialist workshop supplies your

wheelchair ready for use and adjusted

to suit your special requirements.

SPECIFICATIONS/

UTILIZATION

The POWER PRIMUS II, Model 2.432,

was designed for indoor and outdoor

use. It is not suitable for use on all fixed

ramps. Only travel downhill at the lo-

west pre-selected final speed!

Please observe the Safety Instructions!

The wheelchair is designed to carry one

passenger only on the seat with mounted

side parts and legrests. It should not be

used as a traction mechanism, means of

transportation etc.

Please observe the Safety Instructions!

With the POWER PRIMUS II, you can

negotiate obstacles of up to 50 cm in

height, depending on the positioning of

the legrests.

Please observe the Technical Specifi-

cations!

INTRODUCTION

The

"POWER PRIMUS II" Electronic

Wheelchair, Model 2.432,

is ideal for

persons who require maximum mobility

in extremely confined spaces. This app-

lies, for example, to the home, the of-

fice and also to rooms that you visit in

your leisure time. This is what the

wheelchair was designed for and whe-

re you can test its driving performance

and special design features. This

wheelchair concept is also entirely suita-

ble for outdoor use.

Many details, such as

– short frame

– adjustment options (control box, arm-

rest, legrests)

– exceptionally simple folding proce-

dure

– low transport weight

– problem-free transition to push mode

– and, not least, outstanding kilometric

performance

make this wheelchair a genuine partner.

This operating manual will give you all

the information your require – clearly

written and with illustrations.

Read and observe this operating

manual before you use the

wheelchair for the first time.

Pictures and graphic illustrations

are contained in the appended

illustration part.

ACCEPTANCE

All MEYRA wheelchairs are tested in our

factory for fault-free operation, and are

packed in special boxes.

However, we request that you check the

vehicle for possible transport damage

immediately on receipt – preferably in

the presence of the carrier.

Please arrange the following if you be-

lieve damage occurred during trans-

port:

a) Draw up a DAMAGE REPORT – the

carrier is required to do this.

b) Draw up aLETTER OF SUBROGATI-

ON – you assign to the supplier all

claims resulting from this damage.

c) Send back the BILL OF LADING, the

DAMAGE REPORT and the LETTER

OF SUBROGATION to us.

We are unable to accept any claims for

compensation if you fail to observe these

instructions or notify us of damage after

the goods have been accepted.

1 2 3 4 5 6 7 8 ... 37 38

Comments to this Manuals

No comments